Plot No.- 318, Phase-V, Sector- 56,

HSIIDC, Kundli Industrial Area, Haryana- 131028

Sales: +91 931-007-6645

Service: +91 7838-006-222

Wire Drawing Machine
  • Drive and control by AC three phase dual-inverter.
  • Horizontal contact-type DC annealing.
  • High productivity, low power consumption.
  • High precision gear drive with low noise
Technical Parameters
Control system Digital
Power Control Dual-Inverter
Wire Inlet Dia 2.6-3.5mm
Wire Finished Dia 1.0-2.76mm
Max Wire Speed 1200M/min
Max No. of Dies 9
Transmission Type Gear drive
Mechanical Elongation 25%+16.7%
Drawing Capstan Tungsten Carbide
Construction of the Machine Body Plate Welding and Annealing
Capston Dia 350mm
Fix Speed Capston Dia 350mm
Spool Bobbin Size SN500, SN630 (optional )
Bobbin Loading & Unloading Type Bi-shafts cone
Traversing Unit AC Reducer Motor and Timing Belt
Main Motor 55kw(6p)
Spooler Motor AC11kw
Correction System Automatic Digital Control of Take-up
Tension Control Buffer Rod with Air Cylender and Rocket Arm
Max Loading Capacity 250Kg(SN500) or 500kg(SN630)
Lubrication Type Lubrication By Full Immersion<
Lubricant capacity 100L/min
Brake Disk Type Brake
Lubrication Type For Bearing Pump Enforce Oil
Annealing Control 3 Pole DC Current Output
Annealing capacity 150Kva
Annealing Voltage Max 65v
Annealing Current 2500A
Power Source 415V/50Hz
Connect Load 77Kw+150kva
Steam Consumption 2-0.3Mpa(with 9kw steam generator)
Cooling Water Consumption 2-0.3Mpa
Air Consumption 0.4-0.6Mpa
Machine Dimension 14 x 3.5 x 4M
Gross Weight 7000Kg
Inquire Now